Dispensers

Syringe Gun
Foot Pedal
Air Only Dispenser
Analog Dispenser  
Digital Dispenser
Dual Gauge Dispenser Fully Digital Dispenser Dual Syringe Dispenser High Volume Dispenser Air Free Dispenser
Vacuum Pick-up Pen Peristaltic Pump
Silent Air Compressor Pail Dispenser
Syringe Filling Station Finger Switch Accessories

Dispense Valves

Valve Finder Guide DispenseFinder^©
Valve Controller
Front Closing Valve Spool Valve
Spray Valve
Manual Diaphragm
MOD Diaphragm Valve Diaphragm Valves Metering Valves
Pinch Tube Valve
Auger Valves
Auger Controller
Twin Valve
Dispense Stands
Valve Handles

Reservoirs

1 Pound Reservoir
1 Liter Reservoir
2 Gallon Reservoir
5 Gallon Reservoir
10 Gallon Reservoir

Also available with a micrometer adjustment and in a high volume model (5101293-HV below).

• Stainless steel fluid body for superior material compatibility.
• Divorced valve design prevents material contamination of the air body.
• Adjustable flow control.
• Reversible valve seat.
• Spring-assisted valve closure for reliable cycle stops.
• Compatible with all Luer Lock needle tip designs.
• High pressure for consistent processing of viscous materials.

5101292 Front Closing Valve Specifications

• Dimensions: 152 mm x 19 mm x 19 mm (6.00 in x 0.75 in x 0.75 in)
• Weight: 6 oz
• Viscosity Range: 1 cps - Paste
• Operating Air Pressure: 30-100 PSI
• Maximum Fluid Pressure: 3500 PSI
• Wetted Parts: Stainless Steel, Viton, Teflon®

5101292 Front Closing Valve Drawing.
 

The 5101292-MIC features a micrometer flow adjustment that makes fine tuning simple and precise. The 5101292-MIC is compatible with all IDS automated dispensing platforms.

The 5101292-MIC Front Closing Valve has features including:

• Stainless steel fluid body for superior material compatibility.

• Micrometer flow adjustment with lock nut.

• Divorced design prevents material contamination of air section.

• Reversible valve seat.

• Spring-assisted valve closure for reliable cycle stops.

• Compatible with all Luer-Lock needle tip designs.

• High inlet pressure rating allows for processing of viscous chemistries.

5101292-MIC Front Closing Valve Specifications

• Dimensions: 6.75 in x 0.75 in x 0.75

• Weight: 7 oz.

• Viscosity Range: 1 cps – Paste

• Operating Air Pressure: 60 – 100 psi

• Maximum Inlet Fluid Pressure: 3500 psi

• Wetted Components: Stainless steel, Teflon®, Kalrez®

The fluid viscosity that is being dispensed is a factor and their are differing front closing valves to accommodate higher flows (the HV Models, below) and harsh materials (the HV carbide steel version). Consult with IDS before ordering.
 

Also available in 5101293-HVC Front Closing, high volume, carbide steel, for aggressive material handling.

• Stainless steel fluid body for superior material compatibility.
• Divorced valve design prevents material contamination of the air body.
• 1/4” NPT fluid port allows for higher flow rates.
• Adjustable flow control.
• Reversible valve seat.
• Spring-assisted valve closure for reliable cycle stops.
• Compatible with all Luer-Lock needle tip designs.

• Dimensions:  7.9 in x 1.15 in x 1.15 in

• Weight:  19 oz (1lb 3 oz)

• Viscosity Range:  1 cps - Paste

• Operating Air Pressure:  50-100 PSI

• Maximum Fluid Pressure:  600 PSI

• Wetted Parts:  Stainless Steel, Viton, Teflon®

Front Closing, High Volume Valve Drawing
 

Use these valves on one of our robots, on a stand or take a look at our selection of valve handles for easy manual use.

The Front Closing Valves operate by a combination of pneumatic and mechanical functions - by a regulated flow of air pressure and a spring assist. These combine to help move and manage material that fills the interior chamber. The pressure forces the valve to open, which in turn lifts the needle, permitting fluid to flow.

The length of the needle stroke is determined by the stroke adjustment knob located at the top of the valve. Using a timer, the air solenoid will then close and force the needle down. In addition to the air pressure, there is a spring assist to help close the opening, giving you a clean, sharp cutoff, eliminating messy dripping and stringing.

This is an excellent all purpose, single material valve, used in a variety of applications, including beads, gaskets, shots large and small (using the micro version) potting and bonding. This valve is referred to as a front closing valve, needle valve, high pressure valve, or silicone valve, and is perfect for grease dispensing, lubricant dispensing valve, silicone dispensing. As always, be sure to check for material compatibility. If the material is gritty, there is a carbide steel version available.

Part #                    Front Closing Valves

Complete valve systems

5110010       (1) Front Closing Valve, (1) 1 Liter Tank, (1) Valve Controller, all necessary connections and tubing.

5110011       (2) Front Closing Valve, (1) 1 Liter Tank, (2) Valve Controller, all necessary connections and tubing.

5110012       (1) Front Closing Valve, (1) 1 Liter Tank, (1) Air Powered Trigger Assembly, all necessary connections and tubing.

5110013       (1) Front Closing Valve, (1) 1 Liter Tank, (1) Valve Controller, (1) Valve Stand, all necessary connections and tubing.

5110014       (1) Front Closing Valve, (1) 1 Gallon Pressure Tank, (1) Valve Controller, all necessary connections and tubing.

5110015       (1) Front Closing Valve, (1) 1 Gallon Pressure Tank, (1) Air Powered Trigger Assembly, all necessary connections and tubing.

5110016       (1) Front Closing Valve, (1) 1 Gallon Pressure Tank, (1) Valve Controller, (1) Electric Trigger Assembly, all necessary connections and tubing.

5110017       (1) Front Closing Valve, (1) 1 Gallon Pressure Tank, (1) Valve Controller, (1) 7080003, all necessary connections and tubing.

5110018       (2) Front Closing Valve, (1) 1 Gallon Pressure Tank, (2) Air Powered Trigger Assembly, all necessary connections and tubing.

5110019       (1) High Volume Front Closing Valve, (1) 1 Gallon Pressure Tank, (1) Valve Controller, (1) Valve Stand, all necessary connections and tubing.

ReadyMax UV

Program Flood
Economy Flood
OvenCure
UV Conveyer
Flood Meter
Flood Accessories
UV Spot
UV Spot Meter
Spot Accessories
UV Accessories

Manual Syringes

Luer Lock
Luer Slip
Polycarbonate
Syringe Volumes

Pneumatic Syringes

Pneumatic Syringes
Pneumatic Pistons
Syringe Tip Caps
End Caps
Finger Switch
Syringe Adapters
Air Free Syringes
Syringe Volumes

Needles & Tips

All Metal Reusable
Medical Grade Reusable
Thin Wall Precision
Precision Disposable
Economy Disposable
45° Bent Needles
90° Bent Needles
Aluminum Needles
Crimped Needles
Tapered Tips
Flexible Tips
Teflon Needles 
Oval Needles
Brush Tips

Single Cartridges

Manual Guns
Pneumatic Guns
Syringe Filler
Cartridges
Cartridge Nozzles
Spreader Nozzles
End & Tip Caps
Small Stands
Larger Stands
Cartridge Accessories
Cartridge Volumes

Dual Cartridge Guns and Mixers

50ML Guns & Mixers
2000ML Guns & Mixers
400ML Guns & Mixers

Custom Packaging

1 Component Materials,
2 Component Materials,
Equipment,
Bulk Dispensing