(818) 597-4300

 

Products

Home

Dispensers

Robots

Valves

NPT Needles

Needles & Tips

Reservoirs

Needles

Syringes

Syringe Guns

Cartridges

Cartridge Guns

Dual Guns

UV Equipment

Dispensing Help

Doming/Potting

Solder Dispense

Solder Mask

Accessories

Site Map

Quotes

Lease Program

Special Offers

IntelliSpense™

is a Registered
Trade Mark by IDS.

The unit is designed to apply pipe dope, or thread locker to the outside diameter threads of a fitting.

The threaded fittings are placed in the circular groove of the manifold. The part is then pushed down to cycle the solenoid to open the valve. Material then comes out and the part is rotated by hand to coat the threads.

Features

• Use with high flow front closing valve for dispensing pipe sealants.

• Use with diaphragm valve for thin materials such as CA or Anaerobic materials.

• Use any material reservoir, from a 1-liter bottle tank to a 10-gallon tank.

Choose from four different manifolds which can be easily switched out (on the same unit) to handle a range of parts, in outside diameter of 1/8"-3/8" or 3/4"-1-1/2" . Specify size.

In this Category:

Automation Platforms
Light Curtain
Robot Vision
Thread Sealer
Mounting Hardware
Other Robots

You may also be interested in:

Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot Platform

Also of interest;

Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing Help
Doming & Potting
Solder Dispensing
Solder Mask